IDTEXT(2)               XR32 REFERENCE MANUAL                23/3/2013

COMMAND
        IDTEXT -- Display / Set ID Beacon Text.

SYNOPSIS
        IDT[ext] <port | 0> [text]

AVAILABILITY
        Sysop only.

DESCRIPTION
        Displays or modifies the contents of the regular AX25 "ID"
 beacons, which are transmitted every IDINTERVAL.

 The "port" argument is either a valid port number, or zero.
 In the latter case the command displays or sets the "global"
 IDTEXT.

        If "text" is not specified, the current IDTEXT for the
 specified port is displayed.

 If "text" is specified, the IDTEXT parameter for the specified
 port is changed to the new value.

        The minimum abbreviation of this command is IDT.

EXAMPLES
 IDT 0 !5220.00N/00102.13W Miltown Node.  - Set global IDTEXT
 IDT 3                   - Display current IDTEXT for port 3
        IDP 3 Test only         - Override global IDTEXT on port 3

LIMITATIONS
 The IDTEXT must be a single line only.

 Since the command line is limited to 80 characters, the
 maximum length of IDTEXT that can be entered using this
 command is 74 characters (IDTEXTs that exceed 74 characters
 can only be specified in XROUTER.CFG).


IDTEXT(2)                        END OF DOCUMENT