LINKS(1)                XR32 REFERENCE MANUAL                19/1/2013

COMMAND
        LINKS -- Displays the currently active level 2 sessions.

SYNOPSIS
        L[inks]

AVAILABILITY
        The LINKS command is available to all users.

DESCRIPTION
        The LINKS command lists level 2 user up/downlinks and inter-
        node links.  It is mainly of interest to sysops, and shows the
        callsigns being used at both ends of the link plus some other
        data, such as frame counts and retry rates.

        The command may be abbreviated to "L".

EXAMPLE
        G8PZT:KIDDER} Links:
         Remote Local  Prt Sta Ver Try  T3   Pac  Max Idle  Txq Rxq Asm
         G4FPV  G8PZT   5   5   2   0   177  160   1    90    0   0   0
         GB7PZT G8PZT   7   5   2   0   181  240   7   201    0   0   0
         GB7GH  G8PZT   9   5   2   0   176  120   1    32    3   1   0
        (End of list)

        Remote and Local are the L2 callsigns in use at either end of
        the link.
        Prt   - Port number
        Sta   - Link state (2 = connecting, 4 = disconnecting,                             5 = connected)
        Ver   - AX25 version number
        Try   - Retry count
        T3    - Current state of the LAPB T3 countdown in secs
        Pac   - Paclen
        Max   - Maxframe
        Idle  - Secs since there was any activity on the link
        Txq   - No. of L2 frames queued for transmission
        Rxq   - No. of L2 frames on receive queue
        Asm   - No. of frame fragments awaiting reassembly

NOTE
        The exact format of the response may differ in future
        versions.

SEE ALSO
        AXROUTES -- Display current & recent L2 links

LINKS(1)                        END OF DOCUMENT